AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Car battery charger reviews12/15/2023 ![]() ![]() Not all these steps must be completed to get the battery for use. Step 7 (float charging) and step 8 (pulse charging) are the phases to help maintaining the battery capacity at full level. In this phase, a reconditioning occurs by mixing the battery acid (by using a higher voltage of 15.8 V that creates gassing). The required time is only 3 minutes.Ī reconditioning phase (step 6), an optional process, may follow thereafter. If it does not, maybe it is time to replace the battery. This is a test whether the battery, even after sulphate is removed, can really hold charge. The time required is a maximum of 8 hours.Īfter step 4 is completed, an analysis (step 5) begins, where the charger checks whether the battery voltage does not drop to 12 V. Charging enters step 4 with constant voltage at 14.7 V and declining current to bring the battery to full capacity. When the battery reaches 80% capacity, the battery is ready for use. This is the maximum current charging at increasing voltage to 14.4 V charging the battery to 80% capacity. The third phase (step 3) is bulk charging. Step 1 and step 2 take a maximum time of 8 hours. In this phase, it charges and probes whether the battery can accept full charge. This is done through a higher charging voltage than what a car alternator does. The first process (step 1) is desulphation, which removes sulphate from battery plates, which will improve battery capability to accept charge. The following descriptions refers to the CTEK manual. We shall keep in mind that a lit step lamp means the process is underway and the previous process is considered completed /not required. These are the steps that will run on the CTEK MXS 5.0 charger with temperature compensation: Time to charge to 80% capacity from empty (battery ready for use, entering step 4 in the charging phases): as the following table.Īvailable functions:These are the functions available from the CTEK MXS 5.0 charger with temperature compensation: Target battery: 12 V motorcycle battery (1.2 – 14 Ah), car /AGM battery (14-160Ah). We’ll see if it deserves to be the best car battery charger we need. Many reviews on websites seem to praise this charger. An external charger can help revitalize the vehicle battery. More over, battery capacity will decline when a vehicle which is not driven for some time (a few weeks or months). There are 8 available steps for the charging which will help improving battery condition. This is one of the main features of an external charger. This higher voltage, together with pulse voltage /current can give a significant help to remove sulphate from battery plates, which is the most common cause of battery depletion. Nevertheless, with this standard in-vehicle charging, the battery will deplete over time which will limit its usable lifetime.Īn external charger (such as this CTEK MXS 5.0 portable car battery charger) can do a better job with more functions and higher voltage, such as desuplhation and reconditioning processes (at 15.8 V, which is significantly higher than the in-vehicle alternator charging). The alternator will charge the battery at 13.8 to 14.4 volts. ![]() Vehicle batteries are charged every time the vehicle’s engine is running. Quick recommendation : Recommended, you should keep this charger at home or in the car Why it is recommended to have a portable car battery charger at home What’s in the Box : Charger, alligator clips, eyelet connector, manual, storage bag. Warranty : 5 years (return to manufacturer) Summary Product Name : CTEK MXS 5.0 with temperature compensationįunction : 12V Vehicle Battery Charger /Conditioner ![]()
0 Comments
Read More
Leave a Reply. |